Part no.: Positek G500
• CSA rated for gas/vapor
• 0.5-9.5V or 4-20mA outputs
• ATEX variants of P502, P505 and P520 available
• Up to 160 deg range
Intrinsically safe G500 is CSA approved for use in potentially explosive gas/vapour atmospheres. The G500 is designed for industrial and scientific feedback applications and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas.
The G500, like all Positek® sensors, is supplied with the output calibrated to the angle required by the customer, between 16 and 160 degrees and with full EMC protection built in. The sensor provides a linear output proportional with angle of rotation. There is a machined registration mark to identify the calibrated mid point.
Overall performance, repeatability and stability are outstanding over a wide temperature range. The G500 has long service life and environmental resistance with a rugged stainless steel body and shaft. The flange or servo mounting options make the sensor easy to install, it also offers a range of mechanical options. Environmental sealing is to IP65 or IP67 depending on selected cable or connector options.
Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier . Approved galvanic isolation amplifiers (G005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.
The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.
"*" indicates required fields
Positek
Positek
Positek
Positek
There is a lot of talk about ‘data’ these days. But what can be just important as the data is how you communicate it.
Facing the Inevitable: Sensor Obsolescence, Mitigation Strategies, and Alternatives
Obsolescence. If its only difficulty was remembering how it is spelled it wouldn’t be so bad. And whether you’re trying to replace a sensor that has failed with age or are a manufacturer who can no longer source an important sensor, obsolescence of an inexpensive sensor can create extremely expensive headache. At Everight Position we help customers to understand the causes of sensor obsolescence, explore mitigation strategies and find alternative solutions.
The NEXTGen CANopen inclinometers
The NEXTGen CANopen inclinometers are available now! POSITAL has updated its family of TILTIX inclinometers with new three-axis MEMS accelerometers, enhanced firmware, and a new housing concept.
Robonaut 2 (R2) is a state-of-the-art, highly dexterous anthropomorphic robot. The robot is designed to work with humans and has the ability to use the same workspace and tools.
The robot joints incorporate dual encoders for position and torque feedback while performing in a dynamic application, vibration, shocks, and wide temperature range.