Positek

Positek P500

Part no.: Positek P500

Key Features

• 35mm diameter body

• Analog voltage and current outputs

• Up to 0.1% linearity

• 16-160 deg range; for <16 deg see P502

P500 is a durable, affordable, high accuracy rotary sensor designed for industrial and scientific feedback applications. The P500, like all Positek sensors, is supplied with the output calibrated to the angle required by the customer, between 16 and 160 degrees. The sensor provides a linear output proportional with angle of rotation. There is a machined registration mark to identify the calibrated mid point.

It is particularly suitable for OEMs seeking good sensor performance for arduous applications such as industrial machinery where cost is important.

Overall performance, repeatability and stability are outstanding over a wide temperature range. The P500 has a rugged stainless steel body and shaft for long service life and environmental resistance. The mounting flange is anodised aluminum. The sensor is easy to install with flange or servo mounting options, it also offers a wide range of electrical options. Sealing is IP65 or IP67 depending on selected cable or connector options, and full EMC protection built in.

Datasheet Download

Part Builder

Drawing Download

Manufacturer Website

Call us for more info at 856-727-9500

"*" indicates required fields

Hi, My name is

and I’m interested in the

You can reach me by email at

or phone at

Message

This field is for validation purposes and should be left unchanged.
You may also be interested in:

Positek

X101

  • ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
  • Sensor Mounting: M5 Rod Eyes, Body Clamps or M5 ThreadsSpring loaded pushrod option available
  • Any stroke from 0-5mm to 0-800mm (e.g. 305mm)
  • Sealed to IP65/67 depending on connector/cable option

Positek

M130

  • ATEX/IECEx approved for mining
  • Sensor Mounting: In-cylinder
  • Available in any measurement range from 0-400mm to 0-1485mm
  • Sealed to IP65/67 depending on connector/cable option

Positek

P130

  • Body Diameter: 35mm
  • Sensor Mounting: In-cylinder
  • Available in any measurement range from 0-400mm to 0-1485mm
  • Sealed to IP65/67 depending on connector/cable option

Positek

X111

  • ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
  • Sensor Mounting: M8 Rod Eyes, Body Clamps or M8 ThreadsSpring loaded pushrod option available
  • Available in any measurement range from 0-5mm to 0-800mm
  • Sealed to IP65/67 depending on connector/cable option
Blog:

A Comprehensive Guide to Utilizing Rotary Sensors

Welcome to a journey through the evolution and application of rotary sensors, with a special focus on magnetic sensing technology as presented by Everight Position, an Advanced Sales Partner of POSITAL products.

Facing the Inevitable: Sensor Obsolescence, Mitigation Strategies, and Alternatives

Obsolescence. If its only difficulty was remembering how it is spelled it wouldn’t be so bad. And whether you’re trying to replace a sensor that has failed with age or are a manufacturer who can no longer source an important sensor, obsolescence of an inexpensive sensor can create extremely expensive headache. At Everight Position we help customers to understand the causes of sensor obsolescence, explore mitigation strategies and find alternative solutions.

Sensors As Tough as You Are

If your environment is dirty, hot, wet, or corrosive your requirements may have some similarities with that of the construction industry.

Potentiometers That Make Sense for Sensing

Despite their perceived simplicity, potentiometers can still be an appropriate option in today’s ever-complicated automation industry. Fundamentally a variable resistor, modern potentiometers also offer more traditional outputs such as voltage and current which are common to more expensive sensors.

Complete Posital Product Line

Click Here

Everight Position is dedicated to helping customers find the best solution for their positioning needs.™

©2020, Everight Position  |  Terms & Conditions

Speak directly to one of our experts! We’d love to hear all about your project and determine how Everight can help.

856-727-9500

Email: info@evrtp.com