Part no.: MR340 Incremental Controller for MR340__ Series Sensors
• 100% passive sensing design no electronics whatsoever
• Linear and rotary sensor configurations
• Sensor can be installed in all manner of hazardous locations and potentially explosive atmospheres
• Immune to EMI and RFI
The MR340-1 DIN Rail Mount Controller is the active optical and electrical interface for the MR340 Series ZapFREE Fiber Optic Incremental Encoder System. The system is an innovative all-optical design immune to any electromagnetic interferences such as magnetic fields, lightning, voltage, and other harsh environment conditions.
As the incremental code passes through an MR34X Sensors internal optical pick-up, the phase output of two
light beams creates the classical A/B quadrature signals accessible via the controllers electrical interface.
The controller keeps track of position and also calculates the RPM and speed of the connected encoder Both position and speed can be read via RS485 Modbus RTU serial interface, USB, SSI or analog output. The analog output can be configured for either ±10V or 4-20mA output.
"*" indicates required fields
Micronor
MR341 Incremental Fiber Optic Encoder
Micronor
MR344 Hollow Shaft Incremental Fiber Optic Encoder
Micronor
MR342 Incremental Fiber Optic Drawwire Linear Sensor
Micronor
MR348 MRI-Safe Rotary Incremental Encoder
Robonaut 2 (R2) is a state-of-the-art, highly dexterous anthropomorphic robot. The robot is designed to work with humans and has the ability to use the same workspace and tools.
The robot joints incorporate dual encoders for position and torque feedback while performing in a dynamic application, vibration, shocks, and wide temperature range.
How To: Use an Open Collector Output
All new Gill level sensors come with a secondary output function which operates as a high or low level switch. So what is it and how do I use an Open Collector switch output?
Custom-Off-The-Shelf: The New ‘COTS’ Goods
For decades there has been an initiative to source COTS (Commercial-off-the-shelf) goods when possible, and for good reason. COTS goods generally are less expensive, more readily available and easier to dual source.
Synchronous Serial Interface (SSI) is a widely used serial interface standard for industrial applications between a master (i.g. controller) and a slave (i.g. sensor).