Linear position, rotary (angular) position, and tilt sensors by Everight Position, Positek, Netzer, Gill, Zettlex, and Posital
Distributed in North America by:
Everight Position Technologies Corporation
114 Forrest Avenue, Suite 209, Narberth, PA 19072
856-727-9500 or info@evrtp.com

Located outside North America? Click Here

Controllers

GYDC-05 Controller

High-End Digital Controller for GY Transducers

The GYDC-05 controller enables digital output of 1μm resolution and also analogue output. Other features are as options,
-Additional analogue output of magnet velocity
-SSI output and incremental output

The GYDC-05 controller can be used with: GYcRS/GYMR5/GYFRS/GYGS/GYPM/GYHR/GYcRP probes.

Specifications

Digital output (position) Parallel Binary / (Gray code user-configurable) / Negative logic (「1」 at transistor on)
Incremental output (RS422 line drivers) (Option)
SSI output (Option)
Digital output (position) Resolution 0.01mm/bit (Probe:GYcRS, MR5, FRS)/0.1, 0.05, 0.005, 0.002, 0.001mm/bit
01mm/bit(Probe:GYGS, PM, HR, cRP, KM)/0.01mm/bit(Probe:GYHR)
Analogue output (position) (OUT1) 0-10V / (output current:Max.5mA, load:Min.2kΩ)
4-20mA (oad:Min.500Ω)
Resolution:16bit(1/65536) (Probe:GYcRS, MR5, FRS)
Resolution:0.01%FS (Probe:GYGS, PM, HR, cRP, KM)
Velocity Output (OUT2) (Option) ±10V or 4-20mA
Alarm Output Open collector 0.1A 30VDC (Cable disconnection and magnet drop)
Power Supply +24VDC±5% ( < 160mA)
Frequency Response Std 1kHz (depending on stroke) sampling
Temperature Drift ±10ppmFS/°C
Operating Temperature 0°C-+65°C
Storage Temperature -20°C-+75°C

The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.

Model No.

(1):Digital output
1:Standard (parallel, negative logic, binary code)
2:Incremental output (250kHz)
5A:SSI asynchronous
5S:SSI synchronous

(2):Resolution
D2:0.1mm
D3:0.05mm
D4:0.01mm (Standard)
D5:0.005mm
D7:0.002mm
D8:0.001mm

(3):Direction of output (toward probe tip)
D:output data increase
R:output data decrease

(4):Probe
RS:GYcRS probe
R5:GYMR5 probe
FS:GYFRS probe
GS:GYGS probe (Resolution 0.1mm(D2) only)
PM:GYPM probe (Resolution 0.1mm(D2) only)
RP:GYcRP probe (Resolution 0.1mm(D2) only)
KM:GYKM probe (Resolution 0.1mm(D2) only)
HR:GYHR probe

(5):Effective stroke (mm)

(6):Dead zone length of probe head side (mm)

(7):Analogue position output (OUT1)

AD 0-10V (Standard)
AR 10-0V
BD 4-20mA
BR 20-4mA
CD or CR
bipolar output
[ex]
CD10
CR05
V-V


-10V-+10V
+5V--5V
V Z/F
[ex]
V1/5
V9.5/0.5
Custom order
 
1-5V
9.5-0.5V
I Z/F
[ex]
I5.12/20
I20/5.38
Custom order
 
5.12-20mA
20-5.38mA

*Z=Zero positon

*F=Full scale position

(8):Option:Analogue output (OUT2)
position output:see (7)
velocity output (Note1)
  VA[ ] ±10V
  WB[ ] 4-20mA
  [ ]:max velocity (1.00-999mm/sec)
  (ex.9R99:max velocity=9.99mm/sec)
N:No option

(9):Magnet and Float

Magnet Float
M0:No.Φ magnet
M0SM:No.ΦSPM magnet
M0LM:No.ΦLPM magnet
M2P:No.2P magnet
M2PN:No.2PN magnet
M3:No.3 magnet
M11:No.11 magnet
M11N:No.11N magnet
T142:No.T14-M2 magnet
T144:No.T14-M4 magnet
T162:No.T16-M2 magnet
T163:No.T16-M3 magnet
MG□:other magnet
F28S:Φ28SS316 float
F30S:Φ30SS316 float
F40S:Φ40SS316 (B) float
F42S:Φ42.5SS316 float
F50S:Φ50SS316 float
F54S:Φ54SS304 float
F25N:RF-A10 plastic float
F28N:RF-A6 plastic float
FL□:other float

(Note 1)
VA:When magnet stops, output is 0V. When moving toward probe tip, +10V.
WB:When magnet stops, output is 4mA. When moving in any direction, 20mA.

Dimensions

Controller

Standard:with mating connector 10136-3000PE(Sumitomo 3M)
Option:mating connector with 3m cable

 

Everight Position Technologies Corporation | 114 Forrest Ave., Suite 209, Narberth, PA 19072 | 856-727-9500 or info@evrtp.com