Linear position, rotary (angular) position, and tilt sensors by Everight Position, Positek, Netzer, Gill, Zettlex, and Posital
Distributed in North America by:
Everight Position Technologies Corporation
114 Forrest Avenue, Suite 110, Narberth, PA 19072
856-727-9500 or info@evrtp.com

Located outside North America? Click Here

Compact Series

GYGS Probe / GYGSC Controller

Thin Head Probe

The GYGS probe is a series of which sensor head is extremely thin (20mm thick) adopting new method of detecting magnetostrictive phenomena. Applying to hydraulic cylinder, its total length becomes space saving. GYGS probe is used in combination with the GYGSC controller, which provides analogue output, 0-10V or 4-20mA, and can also be used in combination with GYHC or GYDC-05 controller, which provides velocity output or digital output.

Specifications

Non-linearity < ±0.025%FS TYP
Resolution < 0.01%FS
Repeatability < ±0.01%FS
Temperature Drift ±40ppm FS/°C (probe) / ±50 ppm FS/°C (controller)
Voltage Output 0-10V or 10-0V / (output current: Max. 5mA, load: Min. 2kΩ)
Current Output 4-20 mA or 20-4 mA / (load: Min. 500Ω)
Power Supply +24 (±2) VDC (100mA)
Frequency Response Std 1kHz (depending on stroke) sampling
Admissible Pressure 35MPa (Probe rod)
Operating Temperature -20°C-+80°C (probe) / 0°C-+60°C (controller)
Storage Temperature -40°C-+80°C
Vibration 6G (or 40Hz 2mm PP)
Shock 50G(2msec)
Protection IP67 (probe)
Cable Length 1.5m (Standard) (Option Max.50m)

The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Zero/Gain adjustments by trimmer of controller is possible, std within ±3%FS.

Model No.

(1):Effective stroke
15mm-3000mm

(2):Thread
N8:M18xP1.5, rod Φ8 (Standard)
N:M18xP1.5, rod Φ10
(thread length = 22mm)

(3):Cable length (m)
Standard:1.5m

(4):Cable out direction
L:radial out (Standard)
S:axial out (Option)

(1):Output
A:0-10V
B:4-20mA
C:others (bipolar etc)

(2):Effective stroke
15mm-3000mm

(3):Direction of output
(toward probe tip)
D:output increase
R:output decrease

Dimensions

Radial Cable Type (Standard)

Controller

Axial Cable Type (Option)

Material probe head:SS304.Bs, probe rod:SS304, cable gland:Bs
Standard magnet: No.2PN. Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
Cable direction of radial output type is adjustable.

Everight Position Technologies Corporation | 114 Forrest Ave., Suite 110, Narberth, PA 19072 | 856-727-9500 or info@evrtp.com