Linear position, rotary (angular) position, and tilt sensors by Everight Position, Positek, Netzer, Gill, Zettlex, and Posital
Distributed in North America by:
Everight Position Technologies Corporation
114 Forrest Avenue, Suite 209, Narberth, PA 19072
856-727-9500 or info@evrtp.com

Located outside North America? Click Here

Controllers

GYHC Controller

High Perfomance Analog Controller

GYHC controller outputs 0-10V or 4-20mA proportional to magnet position and velocity (option). Associating with GYcRS, GYMR5 and GYFRS probe, the resolution is 1/65536 (16bit). A toggle switch on front face permits a fine adjustment for zero and gain.

Specifications

Resolution (position output) 16bit (1/65536) (Probe:GYcRS, GYMR5, GYFRS) / 0.01%FS (Probe:GYGS, GYPM, GYHR, GYcRP)
Temperature Drift ±10ppm FS/°C
Position Output OUT1 (OUT2:Option) 0-10V (output current: Max.5mA, load: Min.2kΩ) or 4-20mA (load: Min.500Ω)
Velocity Output OUT2 (Option) ±10V or 4-20mA
Alarm Output Open collector 0.1A 30VDC (Cable disconnection and magnet drop)
Power Supply Standard:+24VDC±5% ( < 150mA) / Option:+15VDC±5% ( < 250mA) (Note1)
Frequency Response Std 1kHz (depending on stroke) sampling
Operating Temperature 0°C-+65°C
Storage Temperature -20°C-+85°C

The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
(Note1)This option is limited depending on probe type and effective stroke.

Model No.

(1):Probe
RS:GYcRS probe
RP:GYcRP probe
R5:GYMR5 probe
FS:GYFRS probe
GS:GYGS probe
PM:GYPM probe
HR:GYHR probe

(2):Effective stroke (mm)

(3):Dead zone length of probe head side (mm)

(4):Analogue position output (OUT1)

AD 0-10V (Standard)
AR 10-0V
BD 4-20mA
BR 20-4mA
CD or CR
bipolar output
[ex]
CD10
CR05
V-V


-10V-+10V
+5V--5V
V Z/F
[ex]
V1/5
V9.5/0.5
Custom order
 
1-5V
9.5-0.5V
I Z/F
[ex]
I5.12/20
I20/5.38
Custom order
 
5.12-20mA
20-5.38mA

*Z=Zero positon

*F=Full scale position

(5):Option:Analogue output (OUT2)
Position:see (4)
Velocity (Note 2)
VA[ ] ±10V [ ]:max velocity
WB[ ] 4-20mA (1.00-999mm/sec)
N:No option (ex.9R99:max velocity=9.99mm/sec)

(6):Power supply
24S:+24VDC (Standard)
15S:+15VDC (Option)

(7):Magnet and Float

Magnet Float
M0:No.Φ magnet
M0SM:No.ΦSPM magnet
M0LM:No.ΦLPM magnet
M2P:No.2P magnet
M2PN:No.2PN magnet
M3:No.3 magnet
M11:No.11 magnet
M11N:No.11N magnet
T142:No.T14-M2 magnet
T144:No.T14-M4 magnet
T162:No.T16-M2 magnet
T163:No.T16-M3 magnet
MG□:other magnet
F28S:Φ28SS316 float
F30S:Φ30SS316 float
F40S:Φ40SS316 (B) float
F42S:Φ42.5SS316 float
F50S:Φ50SS316 float
F54S:Φ54SS304 float
F25N:RF-A10 plastic float
F28N:RF-A6 plastic float
FL□:other float

(Note 2)
VA:when magnet stops, output is 0V. when moving toward probe tip, +10V
WB:when magnet stops, output is 4mA. when moving in any direction, 20mA.

Dimensions

Controller

Everight Position Technologies Corporation | 114 Forrest Ave., Suite 209, Narberth, PA 19072 | 856-727-9500 or info@evrtp.com