Linear position, rotary (angular) position, and tilt sensors by Everight Position, Positek, Netzer, Gill, Zettlex, and Posital
Distributed in North America by:
Everight Position Technologies Corporation
114 Forrest Avenue, Suite 209, Narberth, PA 19072
856-727-9500 or info@evrtp.com

Located outside North America? Click Here

High Performance Series

GYHR Probe / GYMNC Controller

High Ambient Temperature Version

GYHR probe is designed to operate at high ambient temperatures up to 100°C, including sensor head. Electronic parts inside are minimized, yet our device of circuit produces high performance and reliability in the application. Cable used has reinforced silicon rubber sheath which stands ambient temperatures up to 150°C. Max cable extension is 100m. GYHR probe can also be used in combination with GYHC and GYDC-05 controller, which provides velocity output or digital output.

Specifications

Non-linearity < ±0.1%FS TYP
Resolution < 0.01%FS
Repeatability < ±0.05%FS
Temperature Drift 22μm/°C+50ppmFS/°C (probe) / ±50ppmFS/°C (controller)
Voltage Output 0-10V or 10-0V / (output current: Max. 5mA, load: Min. 2kΩ)
Current Output 4-20 mA or 20-4 mA / (load: Min. 500Ω)
Power Supply +24 (±2) VDC (100mA)
Frequency Response Std 1kHz (depending on stroke) sampling
Admissible Pressure 35MPa (Probe rod)
Operating Temperature -5°C-+100°C (probe) / 0°C-+60°C (controller)
Storage Temperature -40°C-+120°C
Vibration 6G (or 40Hz 2mm PP)
Shock 50G(2msec)
Protection IP64 (probe)
Cable Length 1.5m (Standard) (Option Max.100m)

The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Zero/Gain adjustments by trimmer of controller is possible, std within ±3%FS.

Model No.

(1):Effective stroke
15mm-2000mm

(2):Sensor rod diameter
8:Φ8 (Standard)
blank:Φ10

(3):Cable length (m)
Standard:1.5m

*In case of an effective stroke of 1000mm or more, it needs screw side dead zone length of 120mm and tip dead zone length of 120mm.

(1):Output
A:0-10V
B:4-20mA
C:others (bipolar)

(2):Effective stroke
15mm-2000mm

(3):Direction of output
(toward probe tip)
D:output increase
R:output decrease

Dimensions

Probe

Controller

Material probe head:SS304, probe rod:SS304
Standard magnet:T14-M2. Other magnets are available from Magnet Grouping [B].
The tip dead zone length (100mm) depends on the magnet or float type.

Everight Position Technologies Corporation | 114 Forrest Ave., Suite 209, Narberth, PA 19072 | 856-727-9500 or info@evrtp.com