Linear position, rotary (angular) position, and tilt sensors by Everight Position, Positek, Netzer, Gill, Zettlex, and Posital
Distributed in North America by:
Everight Position Technologies Corporation
114 Forrest Avenue, Suite 209, Narberth, PA 19072
856-727-9500 or

Located outside North America? Click Here

High Performance Series

GYMR5 Probe

Compact Head Version

GYMR5 probe has compact sensor head compared with GYcRS probe, yet realizing the same technical specifications and completely compatible. Radial cable-out renders mechanical compactness, especially when mounted inside cylinders. GYMR5 probe is used in combination with GYFC2 or GYHC controller, which provides analogue output and GYDC-05 controller, which provides digital output.


Non-linearity < ±0.025%FS TYP
Resolution (Analog / Digital) 16bit (with GYHC) / Min.1μm (with GYDC05)
Repeatability < ±0.01%FS TYP
Temperature Drift 20ppm FS/°C
Admissible Pressure 35MPa (Probe rod)
Operating Temperature -20°C-+80°C
Storage Temperature -40°C-+80°C
Vibration 6G (or 40Hz 2mmPP)
Shock 100G(2msec)
Protection IP64
Cable Length 0.5m (Standard) (Option Max.200m)

The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Resolution depends on the controller combined.

Model No.

(1):Effective stroke

K8:M16xP1.5, rodΦ8 (Standard)
M:M24xP1.0, rodΦ10
N:M18xP1.5, rodΦ10

(3):Cable length (m)
Standard:0.5m (Max.200m)

*In case user select a sensor with an effective stroke of 1000mm or more, we recommend the sensor of rodΦ10.

Combined controller
Analogue output type:GYHC, GYFC2
Digital output type:GYDC-05
With LED Display:GKS-01


Connector Type (Standard)

Material probe head:SS304, probe rod:SS304
Standard magnet:No.2PN Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.

Everight Position Technologies Corporation | 114 Forrest Ave., Suite 209, Narberth, PA 19072 | 856-727-9500 or