Linear position, rotary (angular) position, and tilt sensors by Everight Position, Positek, Netzer, Gill, Zettlex, and Posital
Distributed in North America by:
Everight Position Technologies Corporation
114 Forrest Avenue, Suite 209, Narberth, PA 19072
856-727-9500 or

Located outside North America? Click Here

Compact Series

GYMT Probe / GYMTC Controller

Compact Type

The GYMT series, the compact probe and controller in the GY series, have an extremely simplified and carefully selected electronics in a small place. By employing COMBICON screw plug connectors of Phoenix Contact in the GYMTC controller, wiring operation becomes easier and more reliable. The GYMTC controller provides 0-10V voltage output or 4-20mA current output, indicating the position of the movable magnet along the GYMT probe rod. The power supply of GYMTC is ±15VDC.


Non-linearity < ±0.05%FS TYP
Resolution < 0.01%FS
Repeatability < ±0.01%FS
Temperature Drift ±50ppm FS/°C (probe) / ±80 ppm FS/°C (controller)
Voltage Output 0-10V or 10-0V / (output current: Max. 5mA, load: Min. 2kΩ)
Current Output 4-20 mA or 20-4 mA / (load: Min. 500Ω)
Power Supply ±15VDC type +15V±5% (< 100mA) / ±15VDC type -15V±5% (< 50mA)
Frequency Response Std 1kHz (depending on stroke) sampling
Admissible Pressure 35MPa (Probe rod)
Operating Temperature -5°C-+60°C (probe) / -5°C-+60°C (controller)
Storage Temperature -40°C-+80°C
Vibration 6G (or 40Hz 2mm PP)
Shock 50G(2msec)
Protection IP67 (probe)
Cable Length 1.5m (Standard) (Option Max.10m)

The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more. Optionally, user can select +12VDC and +24VDC power supply. Zero/Gain adjustments by trimmer of controller is possible, std within ±3%FS.

Model No.

(1):Effective stroke

J8:M20xP1.0, rod Φ8 (Standard)
L8:M16xP2.0, rod Φ8
N:M18xP1.5, rod Φ10
U:3/4-16UNF, rod Φ10
K6:M16xP1.5, rod Φ6

(3):Cable connection
G*:Pigtail type (Standard)
(*:Cable length [m])
CN:Connector type (Option)

Please use the cable as specified on order.
The cable extend and cut needs the readjustment in the factory.
The terminal stand and the connector etc. can be used to connect cable.

C:others (bipolar etc)

(2):Effective stroke

(3):Direction of output
(toward probe tip)
D:output increase
R:output decrease


Pigtail Type (Standard)


Straight Connector (Option)

L Type Connector (Option)

Material probe head: SS304, probe rod: SS304
Standard magnet: No.2PN. Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
Connector:Omron XS2C-D4S1 (straight type) or D4S2 (L type) (Material:PBT plastic

Everight Position Technologies Corporation | 114 Forrest Ave., Suite 209, Narberth, PA 19072 | 856-727-9500 or