Linear position, rotary (angular) position, and tilt sensors by Everight Position, Positek, Netzer, Gill, Zettlex, and Posital
Distributed in North America by:
Everight Position Technologies Corporation
114 Forrest Avenue, Suite 110, Narberth, PA 19072
856-727-9500 or info@evrtp.com

Located outside North America? Click Here

Flexible Rod Series

GYSE-FX-A

Flexible Rod Type / Analog / 4000mm maximum effective stroke

The GYSE-FX series are new models using not a conventinal stainless steel but a polyolefin resin as the rod material. Since it is of a structure with flexibility in the rod part, the position tracking in curve is feasible.(Minimum bend radius 200mm) GYSE series element is used and high accuracy detection is possible. The maximum effective stroke is 4000mm.

Specifications

Non-linearity < ±0.025%FS (Min .±50μm)
Resolution 16bit (1/65536)
Repeatability ±0.001%FS (Min. ±3 µm)
Temperature Drift < ±20ppm FS/°C
Output Analog
Position Output (Standard) 0-10V (output current: Max.5mA, load: Min.2kΩ) or 4-20mA (load: Min.500Ω)
Velocity Output (Option) ±10V or 4-20mA / Resolution:16bit (1/65536)
Alarm Output Open drain 50V 0.1A (Alarm signal for lost magnet)
Power Supply +24 (±2) VDC (80mA)
Frequency Response Std 1kHz (depending on stroke) sampling
Operating Temperature 0°C-+65°C
Storage Temperature -20°C-+65°C
Vibration 3G (or 40Hz 1mmpp)
Shock 10G(2msec)
Protection IP65

The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.

Dimensions

Straight connector type (Standard)

Pigtail Type (Option)

L shape connector type (Option)

Material probe head:Al diecast, pobe rod:polyolefin resin
Standard magnet:No.2Y
Connector:LEMO connector (Material:brass with Ni plating)
(Standard:straight type, (Option:L type)

Everight Position Technologies Corporation | 114 Forrest Ave., Suite 110, Narberth, PA 19072 | 856-727-9500 or info@evrtp.com