Linear position, rotary (angular) position, and tilt sensors by Everight Position, Positek, Netzer, Gill, Zettlex, and Posital
Distributed in North America by:
Everight Position Technologies Corporation
114 Forrest Avenue, Suite 110, Narberth, PA 19072
856-727-9500 or info@evrtp.com

Located outside North America? Click Here

I-SAC Series Servo Controllers

I-SAC MX

High Performance Servo Controller

I-SAC MX is the high-end version of series mploying 32bit DSP, in addition motion control unction is integrated. Increased I/O interfaces enable flexible measures to most user needs.

● User can set a motion profile into ISAC-MX and can automatically control the plant according to the profile.

● Various interfaces with PLC can be worked by giving special target value needed.

● Servo On/Off, Automatic Zero Searching, In-Position output etc are equipped and can be easily interfaced with PLC.

● Two Independent controllers are built-in and can swith axes during operation. For example, from position control mode, immediately switch to load control in real time.

Specifications

Power DC 24V (±15%) 250mA
Input Signal analog (±10V or ±20mA) (A/D16bit) or CW/CCW, pulse train/direction, A/B 1/2/4 (multiply) (differential line driver or open collector)
Output Signal ±10V or ±50mA max load 200Ω (D/A16bit) (scale adjustable)
Sampling 5kHz
General-Purpose Interface Input 17 points, Output 12 points (per channel)
Options Integration compensation, velocity/acceleration feedback, dither, motion etc.

Model No.

channel 1
(1):command input V,I,D,O
(2):feed-back input V,I,D,O
(3):controlled output V or I

channel 2
(4):command input V,I,D,O
(5):feed-back input V,I,D,O
(6):controlled output V or I

Symbol
Command/feed-back
V:analog voltage (±10V)
I:analog current (±20mA)
D:differential line-driver
O:digital open collector)

Output
V:analog voltage ±10V
I:analog current ±50mA (load200ΩMAX)

Dimensions

Everight Position Technologies Corporation | 114 Forrest Ave., Suite 110, Narberth, PA 19072 | 856-727-9500 or info@evrtp.com